Skip to main content
TWIN DRIVE E-BOX 6.0
TRACKLESS BI-FOLDING 
SWING GATE HARDWARE 
SPACE-SAVING FEATURE - 
ALL IN ONE BOX CONCEPT 
NO WELDING REQUIRED

TRACKLESS BI-FOLDING
SWING GATE HARDWARE

DRIVEWAYS UP TO 6.0 MT

SPACE-SAVING FEATURE
ALL IN ONE BOX CONCEPT

WE DEVELOPED AND PATENTED

TWIN DRIVE BI-FOLDING SWING GATE HARDWARE
CZECH INDUSTRIAL PROPERTY OFFICE

PATENT NO. 308673

FREE UP EXTRA SPACE

A traditional type swing-gate use up-to 100% more back space in its opening and closing, if compared with bi-folding swing gates. Meaning that the normal space taken up by a conventional swing gate will be free to utilise in some other way. The CAIS TWIN DRIVE bi-folding hardware is particularly useful in places where space is at a premium such as urban areas with high population density. The traditional swinging gate will take up valuable space and can be quite inconvenient to use at times. Using the CAIS TWIN DRIVE bi-folding system will free up more space for vehicles or foot traffic.

ALL IN ONE BOX CONCEPT
THE INSTALLATION STEPS

The installation do not require complicated steps and materials. No welding is required, and therefore the working time is not too long as well. We invite you to follow the bellow installation steps.

OTHER BENEFITS OF
BI-FOLDING HARDWARE
SINGLE LEAF TWIN DRIVE 3.0

Single Leaf Bi-Folding solution TWIN DRIVE 3.0 is an ideal solution where side entrance access is required. It is designed to allow a vehicle user full manoeuvrability round a property. Compared to a double swing gate, a single Bi-Folding Gate will be less expensive to automate since it requires only one gate operator instead of two. It is a perfect solution for the entrance with gravel surface, taking in account that you do not need to lay down the rails and cables for the second gate opener. There‘s no doubt that Bi-Folding Gates are a money and space saving alternative that are convenient and can be very stylish.

EXTREMLY QUIET

In the past Swing Bi-Folding gates were originally very noisy. Older versions use steel rails and wheels which can be very noisy when compared with New CAIS TWIN DRIVE Trackless Bi-Folding System.

RELIABLE

Another problem that occurred with older Swing Bi-Folding gates was leaves that jumped the rails when the wind is blowing heavily. With the CAIS TWIN DRIVE Trackless Bi-Folding Systemthis can never happen.

NOT FOR USE EVERYWHERE

There is one drawback with this type of bi-folding swing gate in that they can‘t be used everywhere. They need to have a special frame so a few factors need to be taken into account such as cross-bracing. The reason why cross-bracing is fundamental is primarily to keep the leaf from sagging.  A compression cross-brace takes weight from the top bar and transfers it by pushing down against the bottom hinge, or a vertical component or post, which transfers load to both hinges. Improper or missing  cross-bracing will cause the Vertical deflection of the leaf.  Cross-bracing should always “lean into opening”. Furthermore, the bi-folding swing gate only work properly when the internal hinges are properly welded in respect to the vertical axel. You‘ll also need to think about wiring of safety edges, as this type of feature should be accommodated in the frame.

Click to download

FOLLOW ME SET S 4.25
trackless twinned telescopic 
CANTILEVER HARDWARE - 
SPACE SAVING FEATURE 
FAST, DOUBLES SPEED OF OPENING

TRACKLESS TWINNED TELESCOPIC
CANTILEVER HARDWARE FOR
DRIVEWAYS UP TO 4.25 MT

 

WE DEVELOPED AND PATENTED
“FOLLOW ME 4.25”
TWINNED TELESCOPIC
CANTILEVER HARDWARE
PATENT NO. 307791
CZECH INDUSTRIAL
PROPERTY OFFICE

WHY WE MADE “FOLLOW ME” ?

With improvement in the hardware and the growth of the market for condominiums and town homes, there has been a resurgence of interest in space-saving features. The traditional sliding gate need enough room of completely clear back space for the gate leaf to slide into. The Cantilever Telescopic Gates are used when there is no room for the traditional sliding or a swing gate or for architectural effect. According to building experts, the cantilever telescopic gates are considered as “one of the top ten most overlooked items when many architects and builders plan a home“.

HOW “FOLLOW ME” WORKS ?

FOLLOW ME SET – Pocket Gate Hardware is a telescopic cantilever sliding gate hardware that disappears, when fully open, into a compartment in the adjacent fence. The telescopic cantilever hardware split the gate into overlapping sections that slide closed alongside the other section. FOLLOW ME SET travel on flying carriages suspended from a cantilever track feature a dedicated twinned track. FOLLOW ME SET is driven by a standard sliding gate opener (not included) and a series of cables controls the opening and closing of the second leaf. As FOLLOW ME SET is a trackless cantilever system, it will not require any track laid in driveway entrance.

WHAT IS YOUR 1st BENEFIT ?

FIXING THE PROBLEM
OF BACKSPACE

Installing a telescopic pocket cantilever gate rather than a traditional cantilever sliding gate, can solve the problem of backspace, by reducing the necessary space up to 36%. A telescopic cantilever variation called an “cantilever pocket gate” may be used where standard cantilever or swing gate installation is impractical; this version is recommended for homes with a problems of backspace, due to the minor backspace needed for opening.  This is ideal for properties with short driveways as it only needs minimal space for the gate to fully open.

THE INSTALLATION STEPS

We invite you to follow the bellow installation steps of CAIS “FOLLOW ME SET”

WHAT IS YOUR  2nd BENEFIT ?
FAST OPENING AND CLOSING

 

FOLLOW ME is a High-speed telescopic gate hardware that doubles the speed of opening and closing if compared to standard cantilever or traditional sliding gate system, by using an integrated system of special flying carriages + dedicated twinned tracks, and a series of cables that controls the opening and closing of the second leaf.
As the back gate opens the wire rope pulls the front gate panel along by twice as much as the back so it travels at double the speed and goes twice as far ending up directly in front of the back gate when open. The same occurs with the second half of the wire rope when closing.

TWO SIDES FOLLOW ME SET
BI-PARTING TELESCOPIC
CANTILEVER HARDWARE

If your client have some side room on both sides of driveway, but not enough for a traditional cantilever sliding gate, then two telescopic cantilever gates could go side by side that open in different directions, commonly known as Bi-parting Telescopic Cantilever  Gates.

Installing a Bi-parting Telescopic Cantilever Gate is the same as two single piece sliding gates but you have the keeper on one telescopic cantilever gate, instead of a post.

TRIDENT SET 7.5
trackless triple telescopic CANTILEVER HARDWARE - SPACE SAVING FEATURE 
FAST, TRIPLE SPEED OF OPENING AND CLOSING

WHY WE MADE “TRIDENT” ?

With improvement in the hardware and the growth of the market for industrial parks and condominiums, there has been a resurgence of interest in space-saving features. The traditional sliding gate need enough room of completely clear back space for the gate leaf to slide into. The Triple Cantilever Telescopic Gates are used when there is no room for the traditional sliding or a swing gate or for architectural effect. According to building experts, the cantilever telescopic gates are considered as “one of the top ten most overlooked items when many architects and builders plan a home“.

 

 

HOW TRIDENT WORKS ?

A TRIDENT Hardware is a triple telescopic cantilever sliding gate hardware that disappears, when fully open, into a compartment in the adjacent fence. The telescopic cantilever hardware split the gate into three overlapping sections that slide closed alongside the other section. TRIDENT SET travel on fourteen wheel carriages and dedicated flying carriages suspended from a cantilever track feature a dedicated tripled track. TRIDENT SET is driven by a standard sliding gate opener (not included) and a series of cables controls the opening and closing of the second and third leaf. As TRIDENT SET is a trackless cantilever system, it will not require any track laid in driveway entrance.

 

WHAT IS YOUR 1ST BENEFIT ?
FIXING THE PROBLEM OF BACKSPACE – 47%

Installing a triple telescopic cantilever gate rather than a traditional or cantilever sliding gate, can solve the problem of backspace, by reducing the necessary space up to 47%. A telescopic cantilever variation called an “cantilever pocket gate” may be used where sliding or swing gate installation is impractical; this version is recommended for homes or industrial parks with a problem of space, due to the minor backspace needed for opening.  This is ideal for properties with short driveways as it only needs minimal space for the gate to fully open.

 

THE TRIDENT INSTALLATION GUIDE

We invite you to follow the bellow 3D VIDEO step-by-step installation guide.

 

WHAT IS YOUR  2ND BENEFIT ?
FAST OPENING AND CLOSING

TRIDENT is a High-speed triple telescopic gate hardware, that triples the speed of opening and closing if compared to cantilever or traditional sliding gate system, by using an integrated system of innovative flying carriages + dedicated triple tracks, and a series of cables that controls the opening and closing of the second and third leaf. As the back gate opens the wire rope pulls the middle and front gate panel along by three times as much as the back so it travels at triple the speed. The same occurs with the second and third half of the wire rope when closing.

 

Click to download

FOLLOW ME SET M 8.0
TRACKLESS TWINNED TELESCOPIC 
CANTILEVER HARDWARE 
SPACE-SAVING FEATURE 
FAST, DOUBLES SPEED OF OPENING

WE DEVELOPED AND PATENTED “FOLLOW ME M” TWINNED TELESCOPIC CANTILEVER HARDWARE
PATENT NO.307791

CZECH INDUSTRIAL PROPERTY OFFICE

WHY TELESCOPIC
CANTILEVER HARDWARE

The most popular type of sliding gate when space to open is limited is a two panel cantilever sliding gate with one panel stacked in front of the other, commonly known as TELESCOPIC CANTILEVER GATES

HOW TELESCOPIC CANTILEVER
HARDWARE WORK

The back gate panel is driven by motor like a single panel sliding gate is. A telescopic drive mechanism then drives the front gate from the back using a wire rope that wraps around the bottom rail connecting to the ground at one end and the front gate at the other end. There is a sheave (like a pully but for wire rope) fitted to each end of the bottom rail..
As the back gate opens the wire rope pulls the front gate panel along by twice as much as the back so it travels at double the speed and goes twice as far ending up directly in front of the back gate when open. The same occurs with the second half of the wire rope when closing.

Click to download

CROSSTRACK S 4.0
CANTILEVER HARDWARE 
FOR INCLINED DRIVEWAYS - 
ALL IN ONE BOX CONCEPT 
SUITABLE FOR INCLINED DRIVEWAY INSTALLATION

CANTILEVER HARDWARE FOR
SLIDING GATES ON SLOPING
DRIVEWAYS – 4.0 MT
ALL IN ONE BOX CONCEPT
2.85 mt COMPACT PARCEL

CAIS leads the way in thinking Outside the Box for Packaging Cantilever Gate Hardware. Shipping in 21st century has mowed of of the box stores into boxes. With so much ordered online, your clients are rapidly changing their habits in purchasing. CAIS has been one of the first gate hardware manufacturer to understand the importance of packaging by introducing ALL IN ONE BOX CONCEPT. Compact cantilever sliding gate hardware 2.85 mt BOX

SLOPE ACROSS A DRIVEWAY

Cantilever sliding gates can be on driveways that slope across … even if it’s quite steep, this is done by shaping the gate to fit the slope and making the entire track the gate rolls on is straight as possible on the same slope as the driveway.

Generally a larger motor is needed for sliding gates that slope across because it is having to lift a portion of the gates weight.

Guide System to Use

If the top and bottom rails have the same rake (slope), have no palings on the front and the track is reasonably straight a roller guide system may be used. Otherwise a guide rail, block and post system must be used. The guide block and channel needs to be square to the Top Rail and if the top rail is raked the guide block needs to be angled too.

can be Level Opening Downhill

The top of the gate may be level to match a stepped fence and if opening down hill the guide rail can be at the top of the gate because it drops as the gate opens. The guide rail runs through a nylon block … that slides in a channel fitted to a post. The channel must be long enough for the movement of the block.

SLOPE UP THE DRIVEWAY

Any slope up or down the driveway from the direction of the road has little effect on sliding or telescopic gates so long as the footing for the gate track is on the same slope as the driveway. With telescopic gates if the slope from the road is steep the gate heights may need to be adjusted. For very steep grades the wheel will dig into the side of the track to some degree increasing friction so its better to make this part not so steep when forming the driveway in the first place.

can be Level Opening Uphill

In this case the guide rail rises as the gate opens and must not rise above the fence line otherwise the guide post would need to be higher than the fence, which wouldn’t look so good so the guide rail would need to be set lower down the gate, which normally means having to fit a middle rail or depending on the design of the gate the guide rail may be attached to vertical middle stiles or slats.

Click to download

CROSSTRACK M 8.0 E-BOX
CANTILEVER HARDWARE 
FOR INCLINED DRIVEWAY 
SUITABLE FOR INCLINED DRIVEWAY INSTALLATION

CANTILEVER HARDWARE FOR
SLIDING GATES ON SLOPING
DRIVEWAYS – 8.0 MT

CAIS has to ensure that all the gate hardware that your clients need to assemble the CROSSTRACK cantilever sliding gate is included.
See what CAIS “CROSSTRACK M 8.0” and “CROSSTRACK M 6.0” includes:

 

THE INSTALLATION STEPS

Click to download

CHEVRON 2.5 E-BOX
OUTSWING GARAGE DOOR HARDWARE - 
ALL IN ONE BOX CONCEPT 
CAIS INNOVATION

OUTSWING GARAGE
DOOR HARDWARE

We commonly see modern garage door with slide, roll up or tracks, but swing out garage is one of the traditional garages which has a special or unique design.

 

Conventionally, wooden doors are outswing, therefore choose elegant CAIS CHEVRON outswing doors hardware and set your clients wood garage doors swinging at the touch of a button with any standard garage door opener.

CAIS CHEVRON outswing doors hardware is easy to install. Any carpenter with door-hanging experience can easily manage a typical installation of CAIS CHEVRON hardware.

CAIS easy-to-follow VIDEO instructions also make it possible for your clients to DO IT YOURSELF if they would prefer.

INSTALLATION
STEPS

The installations do not require complicated steps and materials, and therefore the working time is not too long as well. We invite you to follow the below installation steps of CAIS CHEVRON outswing door hardware.

Click to download

HANGAR SET 6.6
SLIDING DOOR HARDWARE 
GERMAN STEEL

EASY STEPS TO CHOOSING
THE RIGHT SLIDING DOOR
HARDWARE

Your client need a right sliding hardware? The ‘top hung’ system is most often used. CAIS got you covered with HANGAR sliding kits for Single Sliding applications. CAIS manufacture genuine sliding carriage door designs and hardware for interior sliding doors and exterior sliding doors. The door is hung by trolley hangers at the top of the door running in a concealed track; all the weight is taken by the hangers, making the door easier to move. CAIS can always help you select the hardware for your project by showing you how each of our sliding door options work. Maybe you want something a little different? Take a look at all our sliding door hardware sets, HANGAR SET 2.2, HANGAR SET 4.4 and HANGAR SET 6.6

ADVANTAGES OF SLIDING DOORS

Advantages of sliding doors are that there is almost no room required to open the door, they are relatively easy to automate. The mechanism is also secure, since it cannot be lifted out of its hinges. CAIS HANGAR Sliding doors are commonly found as Aircrafts Hangars, Warehouse, Large plain buildings in Industrial Parks, Railway warehouse, agricultural storage, Sawmill Plants.  There is one drawback with this type of Sliding Doors in that they can‘t be used everywhere, in particular at Cool Warehouses and cold storages.

At each end is an Internal Guide End Stop FINISH S to absorb any impact made if the door is slammed and to hold the door in the open or closed position. All top hung sliding door sets have a maximum weight limit per Carriage for Sliding Door SPEED C. When specifying a suitable sliding system the estimated weight of the door is a critical factor. As the door is hung at the top from two points, it also needs a bottom track/stay roller to prevent it from swinging sideways, RS25 or RS40.

 

THE INSTALLATION STEPS

The installations do not require complicated steps and materials, and therefore the working time is not too long as well. We invite you to follow the bellow installation steps of CAIS HANGAR SET top hung door hardware.

Click to download

ALL IN ONE S E-BOX 4.0
SLIDING GATE 
CANTILEVER HARDWARE - 
ALL IN ONE BOX CONCEPT 
NO WELDING REQUIRED

DOES SIZE REALLY MATTER ?

ASK THE EXPERTS
ALL IN ONE BOX CONCEPT

CAIS leads the way in thinking Outside the Box for Packaging Cantilever Gate Hardware. Shipping in 21st century has moved of the box stores into boxes. With so much ordered online, your clients are rapidly changing their habits in purchasing. CAIS has been one of the first gate hardware manufacturer to understand the importance of packaging by introducing ALL IN ONE BOX CONCEPT .

Compact cantilever sliding gate hardware 2.85 mt BOX

WE DEVELOPED AND PATENTED
“ALL IN ONE E-BOX”

CANTILEVER HARDWARE
DRIVEWAYS UP TO 4.0 MT

PATENT UTILITY MODEL N.28617

WHAT MAKES THE “ALL IN ONE”
CANTILEVER HARDWARE
DIFFERENT ?

CAIS has to ensure that all the cantilever gate hardware, that your clients need to assemble the cantilever sliding gate, is included in ONE BOX.
See what CAIS “ALL IN ONE” box includes:

PARCEL DELIVERY
EASY AND AFFORDABLE

The longer the item, the more your Client have to pay to send a long parcel. Posting the long parcels does not need to be a headache anymore. To find the cheapest way to send a long parcel CAIS has invented and patented “ALL IN ONE” the Compact Cantilever Sliding Gate Hardware. According to the most reputable couriers, anything longer than 3.0 mt is considered as a Long Parcel Delivery, with extremely high courier rates. Therefore CAIS “ALL IN ONE” Compact Cantilever Sliding Gate Hardware is the ideal solution for Cantilever Gates up to 4.0 mt, making parcel delivery easy and affordable.

THE INSTALLATION STEPS

The installations do not require complicated steps and materials, and therefore the working time is not too long as well. We invite you to follow the bellow installation steps of CAIS “ALL IN ONE” cantilever sliding gate hardware.

“ALL IN ONE”
CANTILEVER GATE HARDWARE
WITH NO WELDING REQUIRED

While welding has long been utilized in gate industry, the alternative is fastening which offers a several benefits to your clients over welding. First of all Safety – no chance of fires from a random sparks, simplicity – easy to install, speed – fast installation, cost and time savings – no need for costly galvanization. Check out the CAIS introduction video and find out why so many forward-thinking blacksmiths have made the switch from welding to CAIS “ALL IN ONE” Cantilever hardware.

SPARK YOUR CREATIVITY

If you’ve never installed CAIS “ALL IN ONE” before, today’s easy-to-use 3D VIDEO MANUAL speed up the learning process. Time to spark your creativity.

 

Click to download

ALL IN ONE M 8.0 E-BOX
SLIDING GATE 
CANTILEVER HARDWARE 
EASY ASSEMBLY

PARCEL DELIVERY
EASY AND AFFORDABLE

The longer the item, the more your Client have to pay to send a long parcel. Posting the long parcels does not need to be a headache anymore. To find the cheapest way to send a long parcel CAIS has invented and patented “ALL IN ONE” the Compact Cantilever Sliding Gate Hardware. According to the most reputable couriers, anything longer than 3.0 mt is considered as a Long Parcel Delivery, with extremely high courier rates. Therefore CAIS “ALL IN ONE” Compact Cantilever Sliding Gate Hardware is the ideal solution for Cantilever Gates up to 8.0 mt, making parcel delivery easy and affordable.

WHAT MAKES THE “ALL IN ONE”
GATE HARDWARE DIFFERENT ?

CAIS has to ensure that all the gate hardware that your clients need to assemble the cantilever sliding gate is included.
See what CAIS “ALL IN ONE” box includes:

DIFFERENCE BETWEEN A
CANTILEVER GATE AND A
SLIDING GATE 

Cantilever gate is a unique type of sliding gate, but with distinctive, interesting differences from your typical gate with wheels. One of the primary differences between a cantilever gate and a sliding gate is the location of the wheels that helps the gate move. A cantilever sliding gate rests and rolls on a wheel on the front bottom edge of the gate with a track supporting wheels on the back edge. In contrast, a cantilever gate is held above the ground, moving along rollers running along the top and inside of the fence, with wheels attached to a vertical concrete foundation.

CANTILEVER GATE
SPACE REQUIREMENTS

 

Generally, the space required to accommodate a sliding gate is the same as the width it covers, with a few extra feet for access.  A 9.0 mt wide driveway would need to have 9.0 mt on one side for gate storage and about 0,3 mt to allow manoeuvrability around the gate frame. A cantilever gate needs to be about 35 percent wider than its span to counterbalance the weight of the suspension posts.

INSTALLATION
STEPS

The installations do not require complicated steps and materials, and therefore the working time is not too long as well. We invite you to follow the installation steps of CAIS ALL IN ONE M 8.0 cantilver hardware.

CANTILEVER GATE
PERFORMANCE

 

Sliding gates have simpler and smaller operating mechanisms than cantilever gates, and as a result, wheel contact with the ground can make operation coarse and noisier than cantilever gates. Since cantilever gate wheels are off the ground, this style can span a wider range of terrain including gravel, grass, blocks and uneven, angled or steeply inclined surfaces. The absence of contact with the ground also allows cantilever gates to function easily in snowy or icy conditions.

SPACE

 

Single cantilever gates move in one direction, often directly parallel to an existing fence line. This efficient use of space makes a cantilever gate an ideal choice when designing a property’s perimeter fence and security system.

SAFETY

Safety devices are strongly recommended, if not required, when automating a gate. Such safety devices may include safety photo beams, safety edges, and loops detectors. Safety devices are designed and installed to protect against the gate closing on a vehicle. Due to the linear movement of a sliding cantilever gate, the path of the gate is limited in comparison to a swing gate which swings in an arc approximately 90 degrees.

COST

In some instances, when a double swing gate and a single cantilever gate is to be considered, a single cantilever gate will be less expensive to automate since it requires only one gate operator instead of two.

DESIGN

The smart appearance, efficient design, and craftsmanship in a cantilever gate is sure to impress owners, visitors, and customers visiting the property.

Click to download

X-track sets 4.5
one
X-track sets 5.5

Click to download